- Total 0,00 SEK
Professional and documented inspection for safe continued use
Personal fall protection equipment and rescue equipment need to be inspected regularly and in accordance with the manufacturer’s instructions. Wear, damage, ageing and previous use can affect the safety of the equipment, even when defects are not immediately visible.
Hewall Safety carries out periodic inspections of personal fall protection equipment in accordance with the manufacturers’ instructions.
You can:
- bring the equipment to us,
- send the equipment to us,
- or book an on-site inspection at your premises.
Periodic inspection
During a periodic inspection, the following are checked, among other things:
- identification and markings,
- documentation and equipment record,
- history,
- condition,
- function.
The inspection is carried out in accordance with the manufacturer’s instructions and the requirements that apply to the specific product.
The inspection result is documented and forms the basis for the decision on the equipment’s continued use.
Documentation and decision
After the inspection, the result is documented for each component.
The decision may mean that the equipment:
- may remain in use,
- must be taken out of service and discarded,
- must be taken out of service pending further assessment.
Equipment inspected by us is registered in our digital inspection system Q-Control, providing traceability of the product’s history.
Q-Control – documentation and reminders
Through Q-Control, we can create and manage a digital equipment record for each component.
After the inspection, you receive:
- documented inspection results,
- an inspection report for each component,
- an inspection label showing information about the next planned inspection,
- a history of previous inspections and actions.
Three months before the next planned periodic inspection, an automatic reminder is sent by email.
You can also be given access to Q-Control, where you can view your registered equipment and view or download inspection reports.
What equipment can we inspect?
Hewall Safety has training and manufacturer authorisations for the inspection, servicing and repair of products from, among others:
- CAMP,
- INNOTECH,
- Tractel,
- IKAR.
We can also carry out periodic inspections of products from other manufacturers where the manufacturer’s instructions state that the inspection may be carried out by a competent person and we have the competence and documentation required for the specific product.
What needs to accompany the equipment?
For the inspection to be carried out efficiently, the following needs to be available:
Manufacturer’s instructions
The manufacturer’s instructions state, among other things, how the product is to be inspected, what limitations apply and which criteria may require the product to be taken out of service.
If the instructions are missing, we may in some cases need to locate the current documentation from the manufacturer.
Equipment record and history
The product’s history is an important part of the assessment.
The equipment record should include information such as:
- product identification,
- date of first use,
- previous inspections,
- events that may have affected the product,
- servicing or other actions.
Equipment previously inspected by Hewall Safety already has its digital history registered in Q-Control.
Clean equipment
The equipment must be cleaned in accordance with the manufacturer’s instructions before it is submitted.
Dirt and other contamination can make it difficult to carry out a correct visual and tactile inspection and may also conceal damage or other effects.
If the product history is unknown
If the equipment has been used but its history cannot be verified, this needs to be taken into account in the assessment.
Gaps in the history must not be filled with assumptions.
If safe continued use cannot be confirmed based on the product’s condition, documentation, history and the manufacturer’s instructions, the equipment needs to be taken out of service.
Uncertain status means: do not use the equipment until safe use can be confirmed.
Benefits of having Hewall Safety handle the inspection
You receive:
- professional and documented inspection,
- traceable history for each component,
- digital equipment records,
- inspection reports,
- inspection labels,
- automatic reminders before the next inspection,
- the ability to keep equipment and documentation together in Q-Control,
- access to competence in both personal fall protection equipment and rescue equipment.
This simplifies equipment management, improves traceability and provides a clear basis for decisions on continued use.
Do you need to have your personal fall protection equipment inspected?
Contact us to book an inspection or discuss the scope of your equipment inventory.
Would you like to carry out periodic inspections yourselves?
Hewall Safety Academy offers the training course Competent Person – Inspection of Personal Fall Protection Equipment for persons who will carry out and document periodic inspections within the scope of the training.
Q-Control can also be used as a tool for documenting and managing your company’s equipment and inspection history.
