- Total 0,00 SEK
Personal fall protection equipment is designed and tested for different applications. A product suitable for vertical use is not automatically suitable for inclined or horizontal use.
Vertical Use

The product is used primarily in a vertical direction, for example when working or moving up or down a ladder, mast or other vertical structure.
The anchorage is usually positioned above the user, but permitted anchorage positions depend on the product.
Inclined Use

The product is used in an inclined direction, for example when a line follows the slope of a roof.
Horizontal Use

The product is used primarily in a horizontal direction, for example when a line runs along a roof or another surface.
Horizontal use does not necessarily mean that the working surface is level. A line can run horizontally even on a sloping roof.
Horizontal use does not automatically mean that the product is suitable for use over an edge.
Fall Over an Edge – Edge-Tested

If a fall could cause a rope, line or cable to be loaded over an edge, the product must be specifically designed and intended for this application.
A product tested for falls over an edge has been tested under specified conditions. This does not mean that it can be used over all types of edges. Sharp edges, for example, may present additional risks.
What Do You Need to Check?
These terms describe different applications, but the exact conditions and limitations vary between products and EN standards.
Always check the manufacturer's instructions for use to ensure that the product is suitable for:
- the intended application and anchorage position,
- the risk of a fall over an edge,
- the working conditions in which the product will be used.
Remember
Compliance with a particular EN standard does not automatically mean that a product is suitable for all applications.
