- Total 0,00 SEK
How far a person can fall, the forces generated during fall arrest and the clearance distance required depend on the design and use of the fall protection system.
Here we explain the key concepts and what you need to consider when planning work involving fall risks.
Fall Distance and Fall Geometry
Fall distance is the distance a person falls before the fall is completely arrested. It includes both the free-fall distance and the distance required to decelerate and stop the fall.
Fall geometry describes the relative positions of the user, the anchorage and the fall protection system.
The position of the anchorage is particularly important. An anchorage above the user can normally reduce the free-fall distance, while a lower anchorage position may result in a longer fall.
The length of the line, any slack and the user's position also affect the fall.
An anchorage positioned to the side of the user can also create a pendulum fall, causing the user to swing towards a structure or another obstacle.
What Is Fall Factor?
Fall factor describes the relationship between the free-fall distance and the length of the lanyard used to arrest the fall.
When using an energy-absorbing lanyard, three situations are commonly illustrated:
- Fall Factor 0: The anchorage is positioned above the user, and the potential free-fall distance is very small.
- Fall Factor 1: The anchorage is positioned approximately at the same height as the harness attachment point.
- Fall Factor 2: The anchorage is positioned below the harness attachment point, which may result in a significantly longer free-fall distance.
The greater the free-fall distance, the more energy the fall protection system generally needs to absorb.
Fall factor is an educational concept, particularly relevant to lanyard-based systems. It does not, by itself, determine the actual fall distance or the required clearance distance.
Arrest Force and Energy Absorption
When a fall is arrested, a force is generated that acts on the user, the anchorage and the fall protection system. This is called the arrest force.
An energy-absorbing system limits the arrest force by absorbing kinetic energy and decelerating the fall over a certain distance.
Energy absorption may occur through the extension of an energy absorber or through a braking mechanism in a self-retracting fall arrester.
Energy absorption limits the arrest force but also requires sufficient distance to stop the fall.
This creates a clear relationship between fall distance, arrest force, energy absorption and the required clearance distance.
What Is Clearance Distance?
Clearance distance is the safety distance required for a fall arrest system to arrest a free fall before the user strikes the ground or another obstacle in the fall path.
It is important to check the available clearance distance before starting work. If the distance is insufficient, the user may strike the ground or another obstacle even if the fall arrest system functions as intended.
How Is Clearance Distance Determined?
The manufacturer's instructions for use specify how the required clearance distance must be determined. The required clearance distance can vary significantly between vertical, inclined and horizontal use.
When using an energy-absorbing lanyard, clearance distance can, for example, be described using the following components:
- A – Lanyard length, including connecting devices.
- B – Energy absorber extension, also known as the deceleration distance.
- C – Distance between the harness attachment point and the user's feet.
- D – Safety margin above the ground or another obstacle.
Together, these components represent the required clearance distance (X) in the illustrated example.
Important: This calculation does not apply universally to all fall arrest systems. If the anchorage, line or other parts of the system can extend, deflect or move during a fall, this must also be taken into account unless already included in the manufacturer's specified values.
What Do You Need to Check?
Before starting work, make sure that:
- the anchorage is suitably positioned,
- the potential free-fall distance is minimized,
- the fall protection system is suitable for the intended application,
- sufficient clearance distance is available to arrest a fall,
- there are no obstacles or pendulum fall risks in the fall path,
- the manufacturer's instructions for use and limitations are followed.
Remember
Minimize the fall distance and ensure sufficient clearance distance.
A fall arrest system must both limit the arrest force and stop the fall before the user strikes the ground or another obstacle.
Equipment selection, anchorage position and clearance distance must always be assessed together.
